Project Speed update: Putting wing power into production

When most people think of speed records they immediately think of huge powerful engines. 

But when it is a wind powered land speed record a normal combustion engine is an obvious absence. Glenn Ashby’s engine for Emirates Team New Zealand’s Wind Powered Land Speed project is essentially what is above the craft, the wing, rather than what is hidden under the bonnet.

Because of the speed the land yacht will be travelling once accelerated, it actually requires quite a small area of sail, relative to the craft. The design of the 10-metre-high ridged wing and spar of the land speed craft is an integral performance factor in having the ability to break the world record and exceed 202.9km/h.

A person standing over piece of carbon fibre.
A team member in the build process. Pic – ETNZ

And in many respects, this specific design harks back to previous America’s Cup’s in the AC72 and AC50 catamarans that had hard wing sails as opposed to the soft twin skin wing sails seen on the AC75’s in the 36th America’s Cup.

A constant partner over many campaigns in the evolution of rigs, spars and wings with Emirates Team New Zealand has been the world leading local composite manufacturers Southern Spars who very quickly emerged to Pilot Glenn Ashby and Production Manager Sean Regan as an essential partner in a project as time constrained, labour challenged and performance driven such as the land speed project. 

“The value of the initial decision to partner with Southern Spars is one of those decisions that has only increased over time,” explained Ashby. “These partnerships are always about performance and experience but having them focus on the production of the spar and wing that our designers have designed will help us hit our very tight production timelines with a quality rig designed to generate the power for the craft which will hopefully see us push well towards 250kmph later this year.”

For Mark Hauser and his team at Southern Spars the Emirates Team New Zealand wind powered land speed project was clearly a whole lot more than just another job to squeeze in their already packed production schedule.

“We’ve had a very good relationship with Team New Zealand for a long time now, but when Glenn and the team got involved in this, we saw it as a real opportunity, because it’s something that we are really passionate about. It is composite, its high tech, it’s pushing the boundaries, and it suits everything we do in here,” said Hauser

“A lot of the parts in the wings (in the 35th America’s Cup) were very similar to what we’re doing now. But more so, it is pretty important for our team at Southerns to be involved in things like this as they just thrive on that high tech stuff, especially when you’ve got something in your sights like world speed record to beat. That gets them really excited.”

Design of boat.
The project should come together in the next few weeks.

Hauser is already thinking ahead and has factored in some downtime on the factory floor when the world record attempt is underway later this year. It shouldn’t have too much of an effect on productivity though- Glenn just needs to maintain his speed for over 202.9km/h for three seconds to register as a new world record.

But before getting out on the salt flats ready to shoot for the record, a mountain of milestones remain. The clock ticks and the production continues at a frenetic rate across Auckland from the ETNZ build facility to Southern Spars. But Sean Regan remains optimistic, “The guys are hitting some really strict time lines with the build project. So, in a few weeks, we’ll hopefully see the whole project coming together.”


NAV at Home
West Systems
Jeanneau JY55
M.O.S.S Australia
NAV at Home
West Systems